1 / 4
Torwell FLEX TPU is featured by its high strength and flexibility, acting like a hybrid of plastic and rubber. Benefit from a very wide range of applications with Torwell FLEX TPU. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill.
Torwell FLEX is an innovative 3D printing filament that will definitely change the way you think about flexible filaments. Its unique combination of durability, flexibility and ease of use makes it perfect for a range of applications from prosthetics and medical devices to fashion accessories. Whether you're printing models, prototypes or final products, you can rely on Torwell FLEX to deliver consistently high-quality prints that meet or exceed your expectations. So why wait? Get started with Torwell FLEX today and experience the best 3D printing has to offer!
Make sure your TPU filament is stored in a dry place. Please note that TPU is hygroscopic, which means it tends to absorb water. Therefore, store it airtight and protected from moisture in a closed container or bag with a dehumidifier. If your TPU filament ever gets wet, you can always dry it for about 1 hour at 70° C in your baking oven. After that, the filament is dry and can be processed like new.
1kg roll 3D filament TPU with desiccant in vacuum package. Each spool in individual box (Torwell box, Neutral box, or Customized box available). 8 boxes per carton (carton size 44x44x19cm).
| Basic Color | White, Black, Red, Blue, Yellow, Green, Grey, Orange, Transparent |
| Customization | Accept Customer PMS Color |
Torwell TPU Flexible filament applications include seals, plugs, gaskets, sheets, shoes, key ring case for mobile, hands-bike parts, shock absorbers, prosthetics, medical devices, fashion accessories, and wear rubber seals (Wearable Device / Protective applications).
Printing Guidance: In comparison with most common filaments like PLA and ABS, TPU must be run much slower. Torwell TPU Flexible filament should be printed at lower speed than normal, and using a Direct Drive nozzle type (motor attached directly to the nozzle) due to its soft lines.
| Brand | Torwell |
| Material | Premium grade Thermoplastic Polyurethane |
| Diameter | 1.75mm / 2.85mm / 3.0mm |
| Net Weight | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Gross Weight | 1.2Kg/spool |
| Tolerance | ± 0.05mm |
| Length | 1.75mm(1kg) = 330m |
| Storage Environment | Dry and ventilated |
| Drying Setting | 65˚C for 8h |
| Support Materials | Apply with Torwell HIPS, Torwell PVA |
| Certification Approval | CE, MSDS, Reach, FDA, TUV and SGS |
| Compatible With | Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker and any other FDM 3D printers |
| Package | 1kg/spool; 8spools/ctn or 10spools/ctn, sealed plastic bag with desiccants |
