1 / 3
| Brand | Torwell |
| Material | Premium grade Thermoplastic Polyurethane |
| Diameter | 1.75mm / 2.85mm / 3.0mm |
| Net Weight | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Gross Weight | 1.2Kg/spool |
| Tolerance | ± 0.05mm |
| Length | 1.75mm(1kg) = 330m |
| Storage Environment | Dry and ventilated |
| Drying Setting | 65˚C for 8h |
| Support Materials | Apply with Torwell HIPS, Torwell PVA |
| Certification Approval | CE, MSDS, Reach, FDA, TUV and SGS |
| Compatible With | Makerbot, UP, Felix, Reprap, Ultimaker, Ender3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker and any other FDM 3D printers |
| Package | 1kg/spool; 8spools/ctn or 10spools/ctn sealed plastic bag with desiccants |
| Colors Available | White, Black, Red, Blue, Yellow, Green, Grey, Orange, Transparent (Accept Customer PMS Color) |
Torwell TPU filament is featured by its high strength and flexibility, acting like a hybrid of plastic and rubber.
95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill settings.
In comparison with most common filaments like PLA and ABS, TPU must be run much slower. Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.
Torwell TPU filament combines high strength and flexibility, performing like a hybrid of plastic and rubber. Its 95A hardness grade provides high abrasion resistance and low compression compared to standard rubber parts.
It is best recommended for 3D printers with direct drive extruders and 0.4~0.8mm nozzles. Drying settings are recommended at 65˚C for 8 hours before printing.
For Bowden extruders: print slowly at 20-40 mm/s, disable retraction to reduce stringing/oozing, turn on the cooling fan after the first layer, set first layer height to 100% / width 150% / speed 50%, and optionally set the multiplier to 1.1.
When loading, stop as soon as the filament starts extruding from the nozzle. Additionally, feed the filament directly into the extruder rather than through the feeder tube to prevent drag and gear slippage.
It is compatible with Makerbot, UP, Felix, Reprap, Ultimaker, Ender3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker, and any other FDM 3D printers.
Each spool comes in a vacuum-sealed plastic bag with desiccant, placed in an individual box (Torwell, Neutral, or Customized box). They are shipped 8 boxes per carton (carton size 44x44x19cm).
